What is Phosphor Bronze?

Phosphor Bronze Rod

What is Phosphor Bronze? Phosphor Bronze is an alloy of copper with tin and little unit of phosphorous. If we talk in proportion tin is 0.5-11% and the phosphor is around 0.01% to 0.35%. Tin increases the corrosion resistance of alloy and phosphorous increases the wear resistance and the stiffness of the alloy. Other alloys which include are aluminium, iron, lead, manganese, nickel, silicon and zinc. 

Phosphor Bronze is used for springs, bolts, truss wire, blades and various other situations where resistance to fatigue, wear, and chemical corrosion is required. Here are some of the feature of Phosphor Bronze:

· Has a good electrical conductivity

· Good product for strength performance

· Low coefficient of friction

· Excellence Elasticity

Phosphorous helps in reducing the viscosity (the resistance of fluid in the change of shape) of molten alloys which results in easier and cleaner to cast. Phosphor Bronze was invented by George Montefiore - Levi. George Montefiore-Levi was a Belgian politician and industrialist.

Phosphor Bronze is useful for the welding of Copper Tin Bronzes (Cu-Sn-6-8%) and Brass (Cu-Zn). The electrode of Phosphor Bronze is also suitable for joining wrought (made in a specific way) copper-tin bronzes and brasses to cast iron and carbon steel. Phosphor Bronze has applications in Electrical Products such as Connectors & Transistor Terminals, Consumer Electronics, Telecommunication, Automotive, Oil & Gas exploration, some parts of textile machineries, anti-corrosive chemical machinery parts and in many more has phosphor bronze has a wide range of application. Phosphor Bronze use in many industries and in-depth use is mentioned in the below article.

This alloy Phosphor Bronze use in joining of base metals of similar composition. Phosphor Bronze electrode is used in the construction of equipment for the chemical industry and petrochemical industry. The use of this product is high in naval constructions and installations for seawater desalination (desalination is the process of converting seawater into potable drinking water) and other repair works related to naval. Phosphor Bronze electrode can also be used to weld copper if the resistant metal has ample electrical conductivity. An extremely sensitive Phosphor Bronze diaphragm element allows for accurate measurement of low pressure and vacuum in a variety of applications. Ranges are available to measure low pressure and vacuum in inches of water, ounces per square inch, and millimetres of mercury.

 In acoustic guitar strings, Phosphor Bronze is widely used material.  

Phosphor Guitar string was introduced by D'Addario in 1974 and marketed it as an "extended life" strings. In addition to longevity and having greater resilience, these strings resulted in a "warm, bright, and well balanced acoustic tone." Apart from guitar, Phosphor Bronze wires are used in trumpets, trombones, saxophones etc.

Phosphor Bronze is widely used in Fasteners. Some of the Phosphor Bronze Fastener products are Phosphor Bronze Hex Bolts, Phosphor Bronze U Bolts, Phosphor Bronze Hex Nuts, Phosphor Bronze Stud Bolts, Phosphor Bronze Washers and many more.

Phos-Bronze C filler metal is used widely used in surfacing applications. The higher tin (Sn) content (7.0 - 9.0%) gives “PBC” weld deposits higher tensile/yield strength and greater hardness than Phos-Bronze A. “PBC” is used for base metals of similar composition, for joining cast iron to carbon steel for joining brass alloys. Preheating is recommended.

Watch this video (in this video we have used the electrode of Senor makes. Electrode is SME B14 DC. For more information and datasheet of this electrode kindly click on the electrode name) to get tips & tricks for Phosphor Bronze Welding. Phosphor Bronze welding electrode can be used in overlaying on shafts, pumps, bearing surfaces, impellers, pump rotors, building up missing sections and filling cavities in copper alloy castings.

That's all in this article. Share with your community.

Check out our article on How to Weld CI and Corrective steps for Porosity.

How to weld Cast Iron

Cast Iron Electrodes

  

Hello everyone and welcome to the first article of the year 2020. In this article, I will teach you how to weld Cast Iron as this difficulty is faced not only by amateur welders but professional welders also face the same problem.
In-house welding of Cast Iron can save time and money but there are so many challenges, as they are very difficult to weld but there are certain techniques and proper process which makes welding Cast Iron less difficult.
Cast Iron is the family of Iron-carbon alloys. There are a variety types of Cast Iron and among the most common use is of Grey Cast Iron. Cast Iron has a carbon content of 2%-4% roughly 10 times as much as of most steels which makes Cast Iron welding difficult. The high carbon content uses the carbon to create the flakes of graphite.

GRINDING PROCESS

The first step is the grinding process. After Grinding the oil, dust, grease, etc. should be cleaned perfectly. After the above process is done, the next step is to make U groove weld. “A channel in the surface of a workpiece or an opening between two joint members providing space to contain weld metal.” To know more about Grooves, watch this video.
Before welding, the material should be pre-heated. Do not overheat the CI as it will result in a crack as Cast Iron is a crack sensitive material. Pre-heating temperature must be between 200°C to 300°C. The advantage of pre-heating is if oil or grease is attached then it will get removed during the pre-heating process.

SELECTION OF WELDING ELECTRODE

Now comes the important step which is the selection of welding electrode and amps. Nickel content electrode should be used. Use SME A15 pure nickel welding electrode for single-pass, high dilution weld. For multiple-pass welds SME A19 ferronickel welding electrode is suitable. Amps should be 86-90amps DCEP.
As mentioned earlier regarding the graphite flakes, due to graphite, chances of slag inclusion is higher. Clean the slag in between the welding process and peen each weld bead. The perfect angle for welding Cast Iron is a 90° angle. Got a little bored by reading the whole process? Watch this video of Cast Iron Wheel Repair to understand the process clearly.

COLD WELDING PROCESS

Welding on Cast Iron is also possible without doing pre-heating. This process is known as cold welding process, you can do effective weld even by skipping the pre-heating step. This process is useful when the material is big in size and it's not possible to do some pre-heating. Rest the process is the same as the above. We also have a video for you all on how to do cold welding. Check out the video on cold welding.
Here are some special techniques for you all: 1) Avoid long run during the welding, 25mm is max, after that allow the base to get cool down and again get started welding CI. 2) After every weld peen the beed - tap it lightly with the round part of a ball pen hammer. 3) Always use the specialist nickel-iron electrodes that run on low current.

Check out our new video on how to repair bench vise.

 Check our new article on Porosity and what is Phosphor Bronze.

If you found this post helpful then kindly share it with your companions.

Do you have any tips or suggestions to add? Kindly comment below.